Concrete Sealing
Sealer for driveways, patios, walkways, and interior commercial slabs. Keeps water, salt, and oil out of the pores.
What you are getting
Bare concrete is porous, so it drinks up whatever lands on it. Water gets in and freeze cycles push the surface apart, oil soaks in and stains for good, and the slab picks up a dusty film that never fully sweeps off. Sealing closes that up. We clean and prep the surface first, then apply a sealer matched to the exposure the slab actually gets, whether that is a shaded patio or a driveway that sits in full sun. Indoors it is the same idea on a different floor. Restaurant, retail and office slabs where the concrete itself is the finished surface get cleaned, burnished and sealed so they hold a soft sheen, mop clean at close, and stop powdering under traffic. You can pick a natural matte look or a wet look that darkens and richens the concrete.
- Driveways, patios, and commercial floors
- Blocks water, oil, and salt
- Matte or wet look finish
- Cuts concrete dusting
What the job looks like start to finish
Free Estimate
Send photos or have us come look. You get a written price with the system spelled out and no pressure to book on the spot.
Grind & Repair
We diamond grind the slab to open the concrete, then cut out and fill cracks, rebuild spalls, and level low spots.
Build The System
Pigmented base coat goes down, then flake or quartz broadcast to refusal. Once it sets we scrape and vacuum the surface back flat.
Topcoat & Cure
A clear topcoat seals everything in. Before we start you will know exactly when you can walk on it and when you can park on it.
Get a straight price on your floor
Send a few photos or have us come look. Free written estimate, no pressure to book on the spot.